Domotic protocol

Important Only contributor plugins have their documentation here. You can consult the documentation of the official plugins directly from the Jeedom Market. Once on the plugin in question, click on documentation. You can see here all official plugins in this category

	MQTT Discovery	Plugin for automatic discovery of MQTT equipment based on the principle of ‘MQTT Auto Discovery’ (or ‘HA Discovery’) which exists under home assistant. Cela permet d’utiliser Open MQTT Gateway (https://docs.openmqttgateway.com/) sur esp32 ou l’équivalent Theengs gateway (https://gateway.theengs.io/) on pi. It becomes very easy to manage the presence of bluetooth tags such as nuts or to integrate a large list of BLEA compatible hardware. But it is also compatible with any equipment supporting ‘MQTT Discovery’ such as zwave, zigbee, Nuki, Switchbot, Sonos…	Documentation Stable - Beta Documentation Market Changelog Stable - Changelog Beta
	Agua IOT Micronova navel 2 stove.0	PoeleAgua plugin for managing wood and pellet stoves using the micronova aqua iot platform (navel 2.0) ex: Jolly Mec / Piazzetta / superior / MCZ and much more. See documentation for supported models	Documentation Stable - Beta Documentation Market Changelog Stable - Changelog Beta
	dht22	Plugin allowing the reading of DHT11, DHT22, AM2302 probes connected to the GPIO of a raspberry	Documentation Stable Market Changelog Stable
	EIB - KNX	Connect Jeedom with your KNX home automation system and Jeedom will become a participant in your installation	Documentation Stable Market Changelog Stable
	Global Cache	This plugin allows you to connect all Global Cache devices to Jeedom	Documentation Stable Market Changelog Stable
	Homekit Network Devices Control	This plugin allows you to control your Homekit Network devices in jeedom (not BLE). The purpose of this plugin is to allow the control of devices that are only compatible with the Homekit protocol and no other protocol. So for example not Philips Hue which is accessible via a dedicated plugin !	Documentation Stable - Beta Documentation Market Changelog Stable - Changelog Beta
	Jeedouino	Jeedouino plugin to manage Arduino board (s) (via Ethernet or USB), R.PI GPIOs, PiFace boards (piRack), RPI IO Plus 32e / s boards, MCP23017 (on RPI) or ESP8266 / NodeMCU / Wemos.	Documentation Stable Market Changelog Stable
	Mochad - X10	Plugin to manage X10 devices via the Mochad daemon and a CM15 computer interface	Documentation Stable Market Changelog Stable
	Modbus2MQTT	Allows reading and writing on modbus TCP devices from and to MQTT	Documentation Stable - Beta Documentation Market Changelog Stable - Changelog Beta
	Modbus TCP Server	Plugin transforming your Jeedom into a modbus TCP server	Documentation Stable Market Changelog Stable
	MyModbus	Lecture et écriture en Modbus	Documentation Stable - Beta Documentation Market Changelog Stable - Changelog Beta
	Relay Module	Plugin pour piloter des modules de relais ethernet<ul><li>IOT Relay</li><li>8-channel IP network relay, dual control, RJ45 Ethernet interface</li>> Other type of card could be added upon request	Documentation Stable - Beta Documentation Market Changelog Stable - Changelog Beta
	Niren TcpKpI8O8	Tcpkp plugin for managing Niren tcpkp I/O cards	Documentation Stable - Beta Documentation Market Changelog Stable - Changelog Beta