Z-Wave JS Changelog

IMPORTANT

If there is no information about the update, it means that the update only involves documentation, translations, or text.

21/10/2026

Configuration Additions

Added the Neo Coolcam Light Switch 2 Channel (EU-2) configuration (properties: Switch x2)

Configuration Changes

Configuration fix for the Kaipule PIR Ceiling Sensor (Z-Wave JS “Motion” and “Tamper” properties instead of the old OpenZWave syntax)
Fixing the Nice IBT4ZWAVE configuration (invalid file not loaded, Portal type)

06/09/2026

Upgrade to version 11.21.1 of ZwaveJsUI (stable)
Upgrade to version 11.23.0 of ZwaveJsUI (beta)
Fixed the display of group names

Configuration Additions

Adding the Home Assistant Connect ZWA-2 controller configuration
Added the NeoCoolCam NAS-DS01Z v2 configuration (properties: Opening, Battery)
Added the NeoCoolCam NAS-PD07Z configuration (properties: Motion, Luminance, Temperature, Humidity, Tamper, Battery)
Added the Philio PSE04 configuration (properties: Temperature, Battery, Tamper, Sound)
Added the Shelly Qubino Wave Dimmer configuration (properties: Multilevel, Power, Energy, Heat Sensor Notification, Over-Current Notification, Mains Notification)
Added Shelly Qubino Wave H&T configuration (properties: Temperature, Humidity, Battery)
Added the Shelly Qubino Wave Motion configuration (properties: Motion, Luminance, Battery)
Added Heatit Z-Water2 configuration (9 potential-free relays and 2 NTC temperature sensor inputs)
Added the Zooz ZEN37 800LR Wall Remote configuration (properties: Central Scene x4, Battery)

Configuration Changes

Fibaro FGCD001 Configuration Fix (Firmware 4098 Added)
Modifying the Shelly Qubino Wave Door/Window (QNDW-002C) configuration (adding the Tilt command)
Fixed the Shelly Qubino Wave Shutter configuration (added productId 131)
Changing the Heatit Z-TEMP3 configuration (adding Energy Heat mode to the thermostat mode)

17/07/2026

Upgrade to version 11.19.0 of ZwaveJsUI (stable)
Upgrade to version 11.21.1 of ZwaveJsUI (beta)

01/06/2026

Upgrade to version 11.15.1 of ZwaveJsUI (stable)
Upgrade to version 11.19.0 of ZwaveJsUI (beta)

31/03/2026

Upgrade to version 11.12.0 of ZwaveJsUI (stable)
Upgrade to version 11.15.1 of ZwaveJsUI (beta)

16/03/2026

Automatic plugin configuration on official boxes (Jeedom 4.5.3 mini)

09/03/2026

Configuration Additions

Added configuration for Shelly Qubino Wave Door/Window (QNDW-002C) (properties: Opening, Luminance, Direction, Battery)
Added configuration for Shelly Qubino Wave Plug (QNPL-0A112) (properties: Switch, Power, Energy)
Added configuration for the Zooz ZEN58 Low Voltage XS Relay (properties: Switch, Power, Energy, Voltage, Current)

Configuration Changes

Fixing the Aeotec ZWA001 configuration (default value for the color temperature setting)

02/03/2026

Minor correction on the Statistics page

24/02/2026

Support for custom device images (Jeedom 4.5 mini)
Added missing translations for messages arriving in the notification center

21/02/2026

Update to version 11.12.0 of ZwaveJsUI (beta) (fixes false “Dead” alerts)

11/02/2026

Upgrade to version 11.6.1 of ZwaveJsUI (stable)
Upgrade to version 11.11.0 of ZwaveJsUI (beta)
Added an option to the plugin’s configuration page to set up a remote controller port via a TCP socket (useful for controllers such as the SLZB-MR1U)

04/11/2025

Upgrade to version 11.2.1 of ZwaveJsUI (stable)
Upgrade to version 11.6.1 of ZwaveJsUI (beta)

16/09/2025

Upgrade to version 10.5.1 of ZwaveJsUI (stable)
Upgrade to version 11.2.1 of ZwaveJsUI (beta)

24/06/2025

Fixed a bug that occurred in PHP 8 when creating missing commands.

10/06/2025

Configuration Update Mco Home MH-S412 Dual

05/06/2025

Improvements

Adding the integration procedure

Configuration Additions

Added the Shelly Qubino WAVE_PM_MINI - WAVE PM Mini - Relay configuration (properties: Power, Energy, Over-Current Notification, Over-Voltage Notification, Heat-Sensor Notification, Alarm-Level Notification, Mains Notification, Indicator)
Added the Zooz ZAC38 - ZAC38 - Range Extender configuration (properties: Switch, Alarm-Level Notification, Mains Notification, Indicator, Battery)

04/06/2025

Configuration Additions

Added the Mco Home MH-S411 Simple configuration (properties: Switch, Scene, Central Scene)
Added the Remotec ZXT-800 configuration (properties: Air temperature, Thermostat mode, Thermostat operating state, Thermostat setpoint, Thermostat fan mode, Indicator)
Added the Shelly Qubino Wave 1PM Mini QMSW-0A1P8 configuration (properties: Switch, Power, Energy, Mains Notification, Over-Current Notification, Heat-Sensor Notification, Alarm-Level Notification)
Added the Shelly Qubino Wave 1 Mini QMSW-0A1X8 configuration (properties: Switch, Mains Notification, Heat-Sensor Notification, Alarm-Level Notification)
Added the Heatit Thermostat Z-TEMP3 configuration (properties: Air temperature, Humidity, Thermostatmode, Thermostatoperatingstate, Thermostatsetpoint, Battery, Indicator)
Added the Zooz ZEN15 - Power Switch configuration (properties: Switch, Alarm-Level Notification, Power-Status Notification, Scene, Indicator, Voltage, Power, Energy, Current)
Added the Zooz ZEN54_LR - 0-10V Dimmer configuration (properties: Multilevel, Indicator)
Added the Zooz ZES11 - ZSE 11 - Q SENSOR configuration (properties: Motion, Temperature, Luminance, Humidity, Battery, Notification Alarm Level, Notification Power Status, Notification Motion, Notification Battery Maintenance, Indicator)
Added the Zooz ZES18 - ZSE 18 - MOTION SENSOR configuration (properties: Motion, Battery, Notification Alarm Level, Notification Power Status, Notification Motion, Notification Magnetic, Indicator)

15/11/2024

Upgrade to version 9.26.0 of ZwaveJsUI
Fixed dependency installation method

10/11/2024

Support for mqtts protocol

27/09/2024

Changes to minimum requirements: Core 4.4 and Debian 11 OS

26/09/2024

Improvements

Upgrade to version 9.20.0 of ZwaveJsUI
Code cleaning

Configuration Additions

Added the Neo Signal Repeater + configuration (properties: Temperature, Humidity)
Added the Fibaro FGR224 configuration (properties: Switch, Power, Energy, Over-Current Notification, Over-Voltage Notification)

Configuration Changes

Modifying the Fibaro Fgrgbwm442 configuration to use properties
Configuration changes for the Fibaro FGD212 to improve notification settings

20/05/2024

Improvements

Upgrade to version 9.12.0 of ZwaveJsUI
Addition and management of the two new S2 Long Range security keys

Configuration Additions

Added the Neo Signal Repeater configuration (properties: Temperature, Humidity)
Added Shelly Qubino Wave 1 configuration (properties: Switch, Mains Notification, Over-Current Notification, Heat-Sensor Notification)
Added the Shelly Qubino Wave 1 PM configuration (properties: Switch, Power, Energy, Mains Notification, Over-Current Notification, Heat-Sensor Notification)
Added the Shelly Qubino Wave Pro 1 configuration (properties: Switch, Mains Notification, Heat-Sensor Notification)
Added the Shelly Qubino Wave Pro 1 PM configuration (properties: Switch, Power, Energy, Mains Notification, Over-Current Notification, Over-Voltage Notification, Heat-Sensor Notification)
Added the Shelly Qubino Wave 2 PM configuration (properties: Switch, Power, Energy, Mains Notification, Over-Current Notification, Heat-Sensor Notification)
Added the Shelly Qubino Wave Pro 2 configuration (properties: Switch)
Added the Shelly Qubino Wave Pro 2 PM configuration (properties: Switch, Power, Energy, Over-Current Notification, Over-Voltage Notification)
Added the Shelly Qubino Wave I4 configuration (properties: Central Scene)
Added the Shelly Qubino Wave Shutter configuration (properties: Shutter, Power, Energy, Mains Notification, Over-Current Notification, Heat-Sensor Notification)
Added a subproperty notification-overvoltage for the Notification property

Configuration Changes

Modifying the Neo Plug configuration to use the properties (Note: Some models attempt to enter S2 mode even though the manufacturer does not provide a DSK; to prevent this, select “unsecured” instead of “automatic” mode)

27/02/2024

Improvements

Addition of an additionalDependancyCheck function for the core

Configuration Changes

Modifying the MCOhome Mh7h configuration to use properties

26/12/2023

Improvements

Added an option to enable or disable the Soft Reset
Upgrade to version 9.6.2 of ZwaveJsUI

Configuration Additions

Added the HeatIt Z-TRM6 configuration (properties: Temperature, ThermostatMode, ThermostatOperatingState, ThermostatModeAction, ThermostatSetpoint, Heat-Sensor Notification, Overload Notification)
Added the Sunricher Remote Control 12 Button configuration (properties: CentralScene x12, Battery)

11/12/2023

Improvements

Upgrade to version 9.5.1 of ZwaveJsUI (to be able to select a port in the path format required on certain VMs, you must update the core)

Corrections

Fixed the S2 inclusion bug on the ZwaveJS UI side following a report (in fact, callbacks were not triggered unless a window was open on the ZwaveJS UI interface)

Configuration Additions

Added the Shelly Qubino Wave 1PM configuration (properties: Switch, Power, Energy, Mains Notification, Over-Current Notification, Heat-Sensor Notification)
Added Shelly Qubino Wave 1 configuration (properties: Switch, Power, Energy, Mains Notification, Over-Current Notification, Heat-Sensor Notification)
Added the Shelly Qubino Wave Shutter configuration (properties: Shutter, Power, Energy, Mains Notification, Over-Current Notification, Heat-Sensor Notification)
Added the Shelly Qubino Wave 2PM configuration (properties: Switch, Power, Energy, Mains Notification, Over-Current Notification, Heat-Sensor Notification)
Added the Shelly Qubino Wave 1 configuration (properties: Switch, Mains Notification, Over-Current Notification, Heat-Sensor Notification) Not sure if I should add Power and Energy (I’ll open a ticket if the device is supposed to report consumption, but I don’t think so)
Adding a WindowsCovering property

Configuration Changes

Modifying the Benext Keypad configuration to use the properties (based on Zipato but in the Benext version)
Modifying the MCOhome Mh8FC configuration to use properties
Modifying the MCOhome Mh8FC-4 configuration to use properties
Modifying the configuration of Qubino ZMNKID - Flush OnOff Thermostat 2 to use the properties
Modifying the Widom Meta Wired Motor configuration to use the Windows Covering property
Configuration change for Wenzhou TZ78: use endpoint 0 instead of endpoint 1 (based on user feedback)
Image editing MCOhome Mh8FC (cropping)
Image editing MCOhome Mh8FC-4 (cropping)

27/10/2023

Configuration Additions

Added a notification-door subproperty for the Tilt property

Configuration Changes

Modifying the Aeotec Zwa012 configuration to use the properties
Modifying a subproperty notification-simple for the property Opening

Improvements

Upgrade to version 9.1.2 of ZwaveJsUI

11/10/2023

Corrections

Temporary upgrade to version 8.26.0 of ZwaveJsUI

09/10/2023

Corrections

Fix to prevent certain messages from appearing in the http.error log in specific cases

Improvements

Upgrade to version 9.1.0 of ZwaveJsUI
Added an option to manage notifications in the message center for both active and inactive nodes
Added an option to manage notifications in the message center for missed alarms and callbacks

Configuration Additions

Added the Aeotec ZW187 Recessed Door configuration (properties: Simple Opening, Battery, Software Notification, Power-Status Notification)
Added the Thermofloor Heat It ZM Relay High Power configuration (properties: Switch, Power, Energy, Heat Sensor Notification, Overload Notification, Centra Scene)
Added a notification-simple subproperty for the Opening property

11/09/2023

Corrections

Fix for the OTA firmware update of a module following a change in ZwaveJSUI

Improvements

Upgrade to version 8.25.1 of ZwaveJsUI.
Added the ability to perform an OTW update on a controller (if compatible)
Added an option to manage notifications in the message center for both active and inactive nodes
Added an option to manage notifications in the message center for missed alarms and callbacks

Configuration Additions

Added the Shelly Qubino Wave 1PM configuration (properties: Switch, Power, Energy, Mains Notification, Over-Current Notification, Heat-Sensor Notification)
Added Shelly Qubino Wave 1 configuration (properties: Switch, Power, Energy, Mains Notification, Over-Current Notification, Heat-Sensor Notification)
Added a binary-water subproperty for the Flood property
Added a onlevel-barrier subproperty for the Multilevel property

Configuration Changes

Modifying the MCOhome Mh8FC configuration to use properties
Modifying the NeoCoolCam WS02Z configuration to use the properties
Modifying the Kaipule IM20 configuration to use the properties
Modification of the HRT4_SRT321 configuration to make better use of properties
Modifying the Benext Plug In Dimmer configuration to make better use of its features
Modifying the Dome On Off Plug In Switch Plug In Dimmer configuration to make better use of its features
Modifying the Domux Dx2skz configuration to make better use of its features
Modifying the Swiid Plug configuration to make better use of its features
Modifying the Everspring SM810 configuration to make better use of its features
Modifying the Zipato PD01z configuration to make better use of its features
Modifying the Vision Security ZS5101 configuration to make better use of its features

02/08/2023

Improvements

Upgrade to version 8.22.0 of ZwaveJsUI.
Add all tty entries to the list of ports (this will be unnecessary with the new core, which will allow you to select a port directly by its ID)
Add the latest route to a node’s statistics page (depends on the controller’s SDK)
Added the latest baud rate to a node’s statistics page (depends on the controller’s SDK)
Added the latest baud rate to the overall statistics page (depends on the controller’s SDK)
Added the latest route to the overall statistics page (depends on the controller’s SDK)
Added the latest RSSI to the global statistics page (depends on the controller’s SDK)
Add the latest RSSI to a node’s statistics page (depends on the controller’s SDK)
Added a Network Route graph showing the most recent routes taken (this feature is a work in progress and may not handle all scenarios, depending on the controller’s SDK)
Add a message to the message center when a node goes “Dead” (in addition to the device status command)
Add a message to the message center when a node goes “Alive” after being “Dead” (in addition to the device status command)
Addition of a message in the message center when a node has not woken up after 4 times its wakeup interval

Configuration Additions

Adding a ThermostatFanState property
Add a Label State sub-control to the Barrier Operator property (to provide a label command with text in addition to the numeric command)
Added the MCOhome Mh8FC configuration (properties: ThermostatMode, ThermostatModeAction, ThermostatSetpoint, ThermostatFanMode, ThermostatFanModeAction, ThermostatOperatingState, ThermostatFanState, Temperature)
Added the Heltun HE-FT01 configuration (properties: ThermostatMode, ThermostatModeAction, ThermostatSetpoint, ThermostatFanMode, ThermostatFanModeAction, ThermostatOperatingState, ThermostatFanState, Temperature, Illuminance, Humidity, Power, Energy)
Added the MCOhome MH3901 configuration (properties: ThermostatMode, ThermostatModeAction, ThermostatSetpoint, ThermostatOperatingState, Temperature)
Add a Label State sub-command to the Thermostat Operating State property (to provide a label command with text in addition to the numeric command)

Configuration Changes

Modifying the HRT4_SRT321 configuration to use properties
Modifying the SRT323 configuration to use properties
Editing the HRT4_SRT321 image (cropping)
Editing the SRT323 image (cropping)
Editing the SSR303 image (cropping)
Editing the SIR321 image (cropping)
Editing the SES303 image (cropping)
Editing the SES302 image (cropping)
Editing the SCSC17 image (cropping)

26/06/2023

Improvements

Upgrade to version 8.19.0 of ZwaveJsUI.
FLIRS modules are no longer considered active in the network mesh

Configuration Changes

Modifying the configuration of the Aeotec DSB04100 door/window sensor to use its features
Modifying the configuration of the Aeotec DSC10 Heavy Duty Switch to use its features
Modifying the configuration of the Aeotec DSC06106 Smart Energy Switch to use its features
Modifying the Aeotec DSC11 Smart Strip configuration to use the properties
Modifying the configuration of the Aeotec DSC08101 Smart Energy Illuminator to use its features
Modifying the configuration of the Aeotec DSC014104 Blind Control to use the properties
Modifying the configuration of the Aeotec DSC17103 Micro Double Switch to use its features
Modifying the configuration of the Aeotec DSC18103 Micro Switch 2nd to use its features
Modifying the configuration of the Aeotec DSC26103 Micro Switch 2nd to use its features
Modifying the configuration of the Aeotec DSC27103 Micro Dimmer 2nd to use the properties
Modifying the Benext Panic Watch configuration to use the properties
Modifying the Benext Panic Button configuration to use the properties
Modifying the Benext Plug In Dimmer configuration to use the properties
Modifying the Dome On Off Plug In Switch Plug In Dimmer configuration to use the properties
Modifying the Domux Dx2skz configuration to use properties
Modifying the Everspring AD142 configuration to use properties
Modifying the Everspring AN145 configuration to use properties
Modifying the configuration of the Everspring EH403 LED FloodLight to use the properties
Modifying the Heiman Dx2skz configuration to use properties
Modifying the Philio Smart Dimmer E27 configuration to use the features
Modifying the Philio Pan03 configuration to use properties
Modifying the Popp Smart Plug configuration to use the properties
Modifying the Popp 009105 configuration to use properties
Modifying the Schlage On Wall configuration to use the properties
Modifying the Sigma Power Plug configuration to use the properties
Modifying the Swiid Plug configuration to use the properties

Configuration Additions

Added the Heat It ZM Dimmer configuration (properties: Multilevel, Power, Energy, CentralScene, Notification)
Added the Sigma PZ701U configuration (properties: Switch)
Added the Neo RC03Z configuration (properties: Central Scene, Battery)
Add a Heat-Sensor subproperty to the Notification property
Added the U-Fairy GR-201N configuration (properties: Switch)

10/04/2023

Improvements

Refresh intervals can now be up to 100 seconds instead of 60
Upgrade to version 8.13.1 of ZwaveJsUI.
Modification of the pollValue function for properties with value (thanks @superbricolo)

Configuration Changes

Modifying the configuration of the Aeotec ZWA19 Water Sensor to use its features
Modifying the Aeotec ZWA24 7-in-1 configuration to use properties
Modifying the Everspring SM810 configuration to use properties
Modifying a Velocity property
Editing the Dlink 510 image (cropping)
Image editing Fibaro Fgs-213 (cropping)

Configuration Additions

Added the Sigma PZ701U configuration (properties: Switch)
Added the Neo RC03Z configuration (properties: Central Scene, Battery)
Add a Heat-Sensor subproperty to the Notification property
Added the U-Fairy GR-201N configuration (properties: Switch)

14/02/2023

Configuration Changes

Modifying the Aeotec ZWA24 7-in-1 configuration to use properties
Modifying the Everspring SM810 configuration to use properties
Modifying the Aeotec ZW122 configuration to use properties
Grouping Danfoss Living Connect configurations
Modifying the Fibaro FGR-223 configuration: changing the power and energy endpoints
Modifying the Fibaro FGR-223 configuration: adding hardware and over-current notifications
Configuration changes for the Fibaro FGS213: switching to endpoint 1 (firmware >=3.3) and adding heat sensor and over-current notifications
Editing the Aeotec ZWA24 7-in-1 image (cropping)
Modifying a Velocity property
Editing the Dlink 510 image (cropping)
Image editing Fibaro Fgs-213 (cropping)
Image modification Fibaro Fgs-221 (cropping)
Editing the Fibaro Fgs-223 image (cropping)
Editing the Fibaro Wall Plug image (cropping)
Image modification: Fibaro Wall Plug GEN5 (cropping)

Configuration Additions

Add a Heat-Sensor subproperty to the Notification property
Added the U-Fairy GR-201N configuration (properties: Switch)
Added the Danfoss Boiler Relay configuration (properties: Switch)
Added the Benext Alarm Sound configuration (properties: Switch)

24/12/2022

Configuration Changes

Modifying the configuration of the Aeotec ZWA008 Door Sensor to use its features
Modifying the configuration of the Qubino ZMNHLAX PWM Thermostat to use the properties
Modifying the Qubino ZMNHDA2 Dimmer configuration to use the properties
Changing the Fibaro FGR-223 configuration: modifying the refresh endpoints
Modifying the Fibaro Fgrgbwm442 configuration to use properties
Modifying the Fibaro FGD212 configuration: adding Notification properties
Modifying the Qubino ZMNHBA2 Flush 2 Relays configuration to use the properties
Modifying the Fibaro Walli Switch configuration—adding Notification properties
Modifying the Dlink Dchz110 configuration to use the properties
Modifying the Domitech Smart LED Light configuration to use the features
Modifying the Duwii Switch configuration to use the properties
Modifying the Everspring AN157 configuration to use properties
Modifying the Popp Smoke Sensor configuration to use the properties
Modifying the Duwii Edan 300 configuration to use the properties
Editing the Duwii Dimmer image (cropping)
Image editing for Aeotec ZWA008 Door Sensor (cropping)
Editing the Duwii Switch image (cropping)
Image editing: Duwii Edan 300 (cropping)
Editing the Duwii Blind Control image (cropping)
Editing the Duwii Remote image (cropping)
Editing the Duwii Zs3500 image (cropping)
Editing the image MCO Zipato p210 dimmer (cropping)

Configuration Additions

Added a Load-error subproperty to the Notification property
Add a subproperty Fibaro-effects2 to the Color property

If you’ve made any configuration changes or additions, sync the system and then reload the device commands by “recreating all commands” after the update.

22/12/2022

Improvements

Added a comprehensive Refresh Management engine, useful for certain modules that do not correctly reflect certain changes after an action. Do not use without a valid reason. The configuration files will port the necessary elements if needed.
Added an Options tab to the device page. Use this to view and configure refresh settings and any future options
Added the number of Refreshs on the Health page

Configuration Changes

Modifying the Qubino Luxy Smart Light configuration to use the properties
Modifying the Popp RainMeter configuration to use properties
Modifying the Fibaro FGR-223 configuration—first configuration to use the refresh engine (This module has a known bug: it either fails to report positions or reports them incorrectly when a movement is initiated by Z-Wave.) To retrieve the refresh commands (go to “Reload Commands” and select “Without recreating commands”), you should see the “refreshs” in the Options tab.
Modifying the Fibaro FGR-223 configuration: changing the power and energy endpoints
Modifying the Fibaro FGR-223 configuration: adding hardware and over-current notifications
Changing the Fibaro FGR-223 configuration: replacing the “scene” property with “centralscene”

Configuration Additions

Added configuration for the Qubino Luxy Smart Switch (properties: Switch, Multilevel, Power, Energy, Color, Notification, NotificationEvent)
Added the Qubino Luxy Smart Switch image
Added the Abus Security Center SHSG10000 configuration (properties: Switch, Battery)
Added the image Abus Security Center SHSG10000
Add a Global subproperty to the Rain property
Add a Basic subproperty to the Rain property
Add an Over-Load subproperty to the Notification property
Adding a Waterconsumption property
Adding a Notificationevent property

If you’ve made any configuration changes or additions, sync the system and then reload the device commands by “recreating all commands” after the update.

21/12/2022

Improvements

Addition of the management of Nodes Notifications

Configuration Changes

Modifying the Aeotec Range Extender 6 configuration to use the properties
Modifying the Zipato PD01z configuration to use properties
Modifying the NeoCoolCam PD01zt configuration to use the properties
Modifying the NeoCoolCam PD01z configuration to use the properties
Modifying the Philio / Zipato Micromodule Energy Meter configuration to use the properties
Modifying the Fibaro FGS214 configuration to use properties
Configuration change for Fibaro FGS213: switching to endpoint 0 (to be confirmed)
A Look Back at the Fibaro FGD212 Firmware 3.5 Setup
Configuration change for Zipato Keypad: addition of the NodeNotification property
Configuration change for Schlage Keypad: addition of the NodeNotification property
Modifying the Eurotronic Valve Spirit configuration to use the properties
Grouping Danfoss Living Connect configurations
Modifying the Danfoss Devolo Living Connect configuration to use properties
Modifying the Danfoss Living Connect configuration to use properties
Modifying the Danfoss Pop Radiator Thermostat configuration to use the properties
Modifying the Philio PSP05 configuration to use properties
Modifying the Zipato ZP3102 configuration to use properties
Modifying the Vision ZP3102 configuration to use the properties
Modifying the Remotec ZXT-120 configuration to use the properties
Modifying the Everspring Ad147 configuration to use properties
Modifying the Heatit ThermoFloor Ztemp2 configuration to use the properties
Image modification: Horstmann Secure SRT321 (cropping)
Image editing: Remotec ZXT-120 (cropping)
Image editing Fibaro FGS 224 (cropping)
Image editing Fibaro FGS 213 (cropping)
Editing the Fibaro Button image (cropping)

Configuration Additions

Added the Cherubini ORA ZRX configuration (properties: Shutter, Notification)
Added the Cherubini ORA ZRX image
Added the Heiman HS2WD Siren configuration (properties: Switch, Battery)
Added the image Heiman HS2WD Siren
Added a Power-status subproperty to the Notification property
Adding a NodeNotification property

If you’ve made any configuration changes or additions, sync the system and then reload the device commands by “recreating all commands” after the update.

19/12/2022

Corrections

Fixed some missing attributes on the health page for certain nodes to prevent (harmless) errors in http.error

Improvements

Upgrade from ZwaveJS UI to version 8.6.1
Added S2 support (ZwaveJS UI has made the expected changes)
Add security type to the node information page

Configuration Changes

Modifying the Heiman CO sensor configuration to use the properties
Modifying the Heiman Smoke Detector configuration to use the properties
Modifying the Domux CO sensor configuration to use the properties
Modifying the Vision Security ZS5101 configuration to use the properties
Modifying the HomeSeer Ez Motion configuration to use properties
Modifying the Shenzen Smoke Detector configuration to use the properties
Modifying the Vision Security ZD2102 configuration to use the properties
Editing the Vision Security ZD2102 image (cropping)
Modifying the Aeotec Range Extender 7 configuration to use the properties
Modifying the Zipato ZD2102 configuration to use properties
Modifying the Qubino Weather Station configuration to use the properties
Modifying the Everspring ST814 configuration to use properties
Modifying the Hank HKZW-SO08 configuration to use the properties
Modifying the Hank HKZW-SO01 configuration to use the properties
Modifying the Hank HKZW-SCN01 configuration to use the properties
Modifying the Philio PAT02-B configuration to use properties
Image modification Philio PAT02-B (cropping)
Image modification Abus SHWM1000

Configuration Additions

Added Zipato Energy Meter configuration (properties: Power, Energy, Voltage, Current)
Added image for Zipato Energy Meter
Added the Airzone Aidoo Zwave configuration (properties: Temperature, Thermostatmode, Thermostatmodeaction, Thermostatfanmode, Thermostatfanmodeaction, Thermostatsetpoint, Notification)
Added image for Airzone Aidoo Z-Wave
Adding a Thermostatfanmode property
Adding a Thermostatfanmodeaction property
Adding a Direction property
Adding a Velocity property
Adding a Rain property
Adding a Co property
Addition of a Basic-motion subproperty to the Motion property
Added a Dust-in-device subproperty to the Notification property

If you’ve made any configuration changes or additions, sync the system and then reload the device commands by “recreating all commands” after the update.

15/12/2022

Improvements

Added the ability to display help guides on the page for certain devices (such as the Zipato Keypad, to explain how codes work)

Configuration Changes

Modifying the Aetoec Nanomote Quad configuration to use the properties
Modifying the Fibaro Fgs211 configuration to use properties
Configuration change for Fibaro fgwreu111 Walli Shutter: switching to a Shutter/Level property and moving Power and Energy to Endpoint 1
Modifying the Zipato Keypad configuration to use the properties
Modifying the Schlage Keypad configuration to use the properties

Configuration Additions

Added the Zooz ZEN17 configuration (properties: Switch)
Added image for Zooz ZEN17
Added Abus Flood Sensor configuration (properties: Flood, Tamper, Battery)
Added image for Abus Flood Sensor
Adding a UserCode property

If you’ve made any configuration changes or additions, sync the system and then reload the device commands by “recreating all commands” after the update.

05/12/2022

Improvements

Added a NVM Management tab to the network page. Save, download, send, and Restoration
Added an Update tab to a node’s page.
Add the SDK version to the information page for a controller or the modules connected to it

Configuration Changes

Modifying the Cherubini Widom Smart Plug configuration to use the features
Modifying the Qubino 3-Phase Meter configuration to use the properties
Modifying the Power Factor property for the production option

Configuration Additions

Added the Cherubini Widom Meta double switch configuration (properties: Switch, Central Scene)
Added image for Cherubini Widom Meta double switch
Added the Cherubini Widom Meta wired motor CONTR.7 configuration (properties: Shutter)
Added image for Cherubini Widom Meta wired motor CONTR.7

If you’ve made any configuration changes or additions, sync the system and then reload the device commands by “recreating all commands” after the update.

01/12/2022

Improvements

Handling commands without units when it should (in the Z-WaveJS response) to avoid cluttering the log

Configuration Changes

Modifying the configuration of the Qubino ZMNHNDX Flush 1D to use the properties
Modifying the Fibaro FGSS101 Smoke configuration to use properties
Modifying the Everspring AN-179 Smarthome configuration to use properties
Modifying the configuration of the Aeotec ZWA009 AERQ to use the properties
Modifying the Popp Outdoor Siren configuration to use (some of) its features
Modifying the Aetoec ZWA080 configuration to use (some of) its properties and adding sound commands (volume and tone)
Modifying the Heat property with ALARM SENSOR class handling
Modifying the Smoke property with ALARM SENSOR class handling
Modifying the Thermostat Setpoint property to set the setpoints using the default button widget
Editing the Popp Outdoor Siren image: cropping

Configuration Additions

Added the Secure Hortsmann SRT321 configuration (properties: ThermostatMode, ThermostatOperatingState, ThermostatModeAction, ThermostatSetpoint, Temperature, Battery)
Added image for Secure Hortsmann SRT321
Added the Hoppe ConnectSense Lock configuration (properties: Opening, Notification Sensor, Tilt, Battery)
Added image for Hoppe ConnectSense Lock
Added settings for Hoppe ConnectSense Lock

If you’ve made any configuration changes or additions, sync the system and then reload the device commands by “recreating all commands” after the update.

28/11/2022

Corrections

Correction to the configuration settings to prevent 0 from being sent initially when selecting from a list (for a setting that offers this option)

Improvements

Add a required retry of the engine in case of a failed exclusion
Display the message regarding the 0 command only in the case of an initiated node

Configuration Changes

Modifying the Aeotec TriSensor configuration to use the properties
Modifying the Hank HKZW-MS02 configuration to use the properties
Modifying the Philio PSM02 configuration to use properties
Modifying the Everspring AN158 configuration to use properties
Modifying the Danfoss Room Sensor configuration to use the properties
Modifying the Vision ZS Shock and Vibration configuration to use the properties
Modifying the Fibaro Walli Controller configuration to use properties
Modifying the Fibaro FGD211 configuration to use properties
Modifying the Fibaro Wall Plug UK configuration to use the properties
Modifying the configuration of the Fibaro Walli Outlet F to use properties
Modifying the Fibaro Walli Dimmer configuration to use the properties
Modifying the Fibaro RGBW441 configuration to use the fibaro-effects property
Modification of the Luminance property with the addition of a percentage mode
Modifying the Thermostat Setpoint property to set the setpoints using the default button widget
Modification of the Color property with the addition of a fibaro-effects type (to no longer describe the commands)
Added a recommended setting for the Philio PST02

If you’ve made any configuration changes or additions, sync the system and then reload the device commands by “recreating all commands” after the update.

25/11/2022

Improvements

Addition of ZwaveJS UI version management
Add a message to the message center and on the plugin page when ZwaveJS UI needs to be updated
Upgrade from ZwaveJS UI to version 8.5.1

Configuration Changes

Changing settings for Hank Smart Plug (HKZW-SO08) (display issue)

If you’ve made any configuration changes or additions, sync the system and then reload the device commands by “recreating all commands” after the update.

23/11/2022

Improvements

Add a visual for a pending setting or wake-up
Added a page to view all pending settings
Added a web app page to view all pending settings
Added a “Delete” button to the Pending page. This allows you to delete a pending entry. It does not delete the command that was sent to the controller, but only the pending information in Jeedom (useful for calibration parameters, for example, which never take on the sent value, or any other parameter where this would be unnecessary).

Configuration Changes

Modifying the Popp Strike Lock configuration to use the “opening” property (for the contact)
Modifying the Fibaro FGD212 configuration to add delta management starting with firmware version 3.5 (endpoint 1 on firmware <= 3.4; endpoint 0 on the target only otherwise)
Modification of the Door Lock property to add “Unlock” (with timeout) to all devices using this property

Configuration Additions

Added configuration for the Hank Smart Plug (HKZW-SO08) (properties: Switch, Power, Energy, Voltage, Current, Scene)
Added the Idinio foot dimmer configuration (properties: Multilevel, Power, Energy)
Added settings for Hank Smart Plug (HKZW-SO08)

If you’ve made any configuration changes or additions, sync the system and then reload the device commands by “recreating all commands” after the update.

21/11/2022

Corrections

Change to the network graph: only the first direct paths will turn red when hovering over a node to prevent the Max Stack Size Exceeded error caused by recursion on certain systems and browsers

Improvements

Incorporate refreshNodeCC as a property of a manually created command to refresh a CC
Added a horizontal scroll to the network modal / routing table tab (thanks @Salvialf)
Move the command counter to the right side of the equipment page

Configuration Changes

Modifying the Fibaro FGR223 configuration to use the power of the multilevel class
Modifying the Fibaro FGR222 configuration to use the power of the multilevel class
Modifying the Fibaro FGRM222 configuration to use multilevel power class
Modifying the Devolo Mt02648 configuration to use the properties and add the recommended settings
Modifying the Devolo Mt02647 configuration to use the properties and add the recommended settings
Modifying the Popp Strike Lock configuration to use the properties
Modifying the Aeotec ZWA011 configuration to use its properties and adding its image

If you’ve made any configuration changes or additions, sync the system and then reload the device commands by “recreating all commands” after the update.

18/11/2022

Improvements

Added access to the ZwaveJS UI (in the Z-Wave Network menu, Actions tab). Do not use this to change settings!
Added a port for certain Raspberry Pi models (others will be added if necessary)
Add a command counter for each device (excluding the 4 technical commands)
Add dynamic assistance when no command is given.

15/11/2022

Switch to stable version

04/05/2022

Beta 1st phase