Changelog jeeZigbee

IMPORTANT

If there is no information on the update, it means that it concerns only the update of documentation, translation or text.

18/11/2025

• Retour de la mise à jour du firmware zigbee pour la Luna

IMPORTANT

Il est maintenant possible de mettre zigbee2mqtt 2.X (2.6.0 actuellement) sur une Luna maintenant mais il faut bien mettre le firmware a jour avant (depuis la configuration du plugin puis le bouton de mise à jour du firmware) et ensuite il faut passer de ezsp en ember (toujours depuis la configuration du plugin jeezigbee). En cas de soucis ne pas hésiter à contacter le support.

22/10/2025

• Correction d’un soucis de mise à jour du firmware pour certaine Luna

17/09/2025

• Correction d’un soucis lors de la mise a jour du firmware de la luna

16/09/2025

• Meilleurs gestion des droits lors du lancement du demon
• Ajout d’un nouveau firmware (8.0.3.0) pour la Luna

IMPORTANT

Il est maintenant possible de mettre zigbee2mqtt 2.X (2.6.0 actuellement) sur une Luna maintenant mais il faut bien mettre le firmware a jour avant (depuis la configuration du plugin puis le bouton de mise à jour du firmware) et ensuite il faut passer de ezsp en ember (toujours depuis la configuration du plugin jeezigbee)

24/06/2025

• Version de zigbee2mqtt par defaut 2.4 (sauf pour les luna)
• Correction d’un soucis visuel sur l’inclusion en z2m 2.3 ou plus

14/01/2025

• Mise à jour de la doc

07/01/2025

• La version par defaut de zigbee2mqtt est maintenant 1.42.0
• Support de l’installation de la version de zigbee2mqtt 2.0.X (attention pour l’instant l’installation est possible mais on ne garantie pas que tout marche meme si les 1er tests sont encourageant)
• Bug fix

16/12/2024

• Documentation update
• The firmware update button is hidden if you are in remote mode
• Improved daemon startup
• By default the plugin is in local mode (instead of waiting for configuration)
• The default version of zigbee2mqtt is 1.41 (temporary until the release of 2.0))
• Removed firmware update button on Luna (temporary))

09/27/2024

• Changed minimum versions, core 4.4 and OS Debian 11 minimum

09/24/2024

• Added a link on the equipment page that redirects to the zigbee2mqtt page of the equipment for more information

10/09/2024

• Possibility on boxes with elelabs dongles to flash the Ember firmware (experimental this can completely break your dongle and will not be covered by the warranty or support)
• Fixed bug if root topic is not zigbee2mqtt

05/08/2024

• Improved image management
• Baudrate correction on deconz
• Fixed a bug displaying the configuration window of a node if a piece of equipment is deleted while it is used in binding in another

07/16/2024

• Fixed an error indicating an update of zigbee2mqtt when the version is already up to date
• Added Ember key type
• Fixed a problem when starting the daemon for the first time regarding rights to the log file
• Fixed a problem on some images

04/22/2024

• Fixed a bug on command duplication (on scenes)
• Fixed a bug on sliders with negative value

03/04/2024

• Fixed a bug on the image of the latest version of zigbee2mqtt

03/20/2024

• Fixed a bug with the refresh command

03/13/2024

• Limitation of updating the Zigbee firmware to Luna on Luna boxes (avoids breaking the Zigbee chip in the event of a wrong choice)

02/26/2024

• Fixed a problem with the installation of mqtt
• Modification on the subtopic (it is now a configuration field specific to the command), be careful to update your commands if you have used them.
• Modification of the syntax of the logicalId field for actions (change to json mode::). To find out the news, please consult the plugin documentation.
• Adding the /dev/ttyAMA0 port for raspbee2 on rpi
• Bug fix
• Added a button to deactivate inclusion mode
• Improved inclusion mode detection
• Bug fix (plugin now ignores empty values for commands)

02/19/2024

• Fixed a problem with the installation of mqtt

01/17/2024

• Improved firmware update on Luna
• Better port management on Luna
• Simplifying the port list
• Possibility of sending a message on a subtopic of the set command : arm_mode/mode::arming_stay
• Bugfix
• Management of status feedback on groups

12/26/2023

• Improved zigbee2mqtt daemon shutdown
• Bugfix

12/21/2023

• Removal of the notion of instance
• Possibility of launching an inclusion directly on a router module
• Added conbee 3 support
• Added raspbee 2 support

08/12/2023

• Added an option “Do not allow messages if the equipment has not been seen for more than (s)” (Reserved for advanced users)

05/12/2023

• Support for zigbee firmware update on Luna (beta)
• Support for long logicalId on commands
• Possibility of creating a refresh command (you must add a command then type action/default and in the logical id field put refresh)
• Possibility of adding a cron which requests the updating of the values (be careful, nothing guarantees that the module will really update them, it must support it)
• Fixed a bug with the latest version of zigbee2mqtt

06/11/2023

• Fixed a bug in group management
• Code Optimization
• Fixed bugs during plugin installation (error 500)

09/22/2023

• Possibility to choose the version of zigbee2mqtt

IMPORTANT

For those having problems with an unreachable module following previous updates, you must restore a jeedom backup from before the update then redo the update. I sincerely apologize for this bug which occurs to some of you, it comes from an unexpected function of Zigbee2MQTT which I do not have on my different labs.

09/20/2023

• Fixed a bug on the zigbee2mqtt version

09/19/2023

• Fixed a bug when updating dependencies (Zigbee2MQTT) if you restored jeedom

08/09/2023

• Fixed a bug that prevented orders from being created correctly

04/09/2023

• Ability to configure the listening port of zigbee2mqtt
• Fixed an issue with color type commands
• Correction on the generation of commands which could not work in certain cases
• Improved command naming
• Possibility for Atlas boxes with Elelabs type controllers to update the firmware from jeedom

03/07/2023

• Fixed a problem when sending a positioning command (shutter type)

06/27/2023

• Fixed a problem with detecting certain modules (including profalux)

05/30/2023

• Initial version