Order value

This documentation brings together recommendations for command values (action or info) depending on the types. It is not obligatory to follow them but for better integration into Jeedom it is strongly recommended to do so.

Light

Generic type	Values / Action
Info/Light Status	Or Brightness 0-100 Or 0-99 or 0-255 (depending on the max Action/Light Slider) or Binary 0 = Off other than 0 = On Mandatory
Info/Light Brightness	Luminosité 0-100 Or 0-99 or 0-255 (depending on the max Action/Light Slider) Always use with Light Status on binary command
Action/Light Slider	Brightness dimmer Min&Max Mandatory
Action/Light On Button	Switching on the light (Change of State)
Action/Light Off Button	Turning off the light (Change of State)
Info/Light Color	#RRGGBB format
Action/Light Color	Changing the color, Format #RRGGBB
Info/Light Temperature Color	Mired (<=500) or Kelvin (>500) format)
Action/Light Temperature Color	Changing the color temperature Min&Max Mandatory
Action/Light Toggle	State inversion if binary
Action/Light Mode	Preset/Light scene, can be multiple

Prise

Generic type	Values / Action
Info/Socket Etat	0 = Off 1 = On
Action/Taken On button	Turn on the socket
Action/Taken Off button	Turn off the socket

Interrupteurs

Generic type	Values / Action
Info/Switch Etat	0 = Off 1 = On
Action/Switch On button	Turn on the switch
Action/Switch Off button	Turn off the switch

Ventilateur

Generic type	Values / Action
Info/Fan Etat	0 = Off 1 = On or dimming if speed
Action/Fan On button	Allumer
Action/Fan Off button	Eteindre
Action/Fan Vitesse Rotation	Min Max Mandatory

Volet

Generic type	Values / Action
Info/Status Pane	If Binary : 0 = Closed 1 = Open If Digital : min of Button Slider(otherwise min of State, otherwise 0) = Closed max of Button Slider(otherwise max of State, otherwise 100) = Open If no Silder button : Mandatory Min and Max in the State !
Action/Shield Button Up	Opening the shutter Launch of opening or set max slider value or state or 100
Action/Shutter Button Down	Closing the shutter Start of closure or set min slider value or state or 0
Action/Shutter Stop Button	Stopping shutter movement
Action/Panel Button Slider	Gives the opening proportion of the shutter If present: Mandatory Min and Max

optional :

Generic type	Values / Action
Info/Horizontal Tilt Status Pane	Angle 0->90° (via slider)
Action/Shutter Slider Horizontal Tilt	Angle 0->90° modifiable via min-max of the slider
Info/Vertical Tilt Status Pane	Angle 0->90° (via slider)
Action/Shutter Slider Vertical Tilt	Angle 0->90° modifiable via min-max of the slider

Valves

Generic type	Values / Action
Info/Tap Etat	0 = Off 1 = On
Action/Tap On button	Allumer
Action/Tap Off button	Eteindre

Generic type	Values / Action
Info/Irrigation Etat	0 = Off 1 = On
Action/Irrigation On button	Allumer
Action/Irrigation Off button	Eteindre

Generic type	Values / Action
Info/Valve Generic Etat	0 = Off 1 = On
Action/Valve Generic On button	Allumer
Action/Valve Generic Off button	Eteindre

add a dimmer ? and add digital to the action ? it exists ?

Serrures

Generic type	Values / Action
Info/Lock Status	0 = Not Secure (Not Locked) 1 = Secure (Locked)
Action/Lock Open Button	Unlocking
Action/Lock Close Button	Verrouillage

Mouvement

Generic type	Values / Action
Info/Presence	0 = No movement 1 = Movement

Opening

Generic type	Values / Action
Info/Door Info/Window (same treatment)	0 = Contact (Closed) 1 = No contact (Open)

Mermaids

Generic type	Values / Action
Info/Siren Status	0 = Does not ring 1 = Rings

Alarme

Generic type	Values / Action
Info/Alarm status	1 = Triggered (priority on activated and modes)
Info/Status alarm activated	0 = Disarmed (priority on modes)
Info/Alarm mode	Label showing Exactly the name of an Action/Alarm Mode command
Action/Armed Alarm	Arm the alarm
Action/Alarm released	Disarm the alarm
Action/Alarm Mode	Alarm mode, can be multiple

Thermostats

Generic type	Values / Action
Info/Thermostat Status (BINARY)	0 = Off 1 = On
Info/Thermostat Status (HUMAN)	‘off’ or ‘stopped’ or ‘arrest’ ‘heat’ or ‘heating’ ‘cool’ or ‘air conditioning’ Prefer English
Info/Thermostat Mode	‘Off’ or ‘Arret’ = OFF ‘None’ or ‘Thermostat’ = Setpoint Mode Label showing Exactly the name of an Action/Thermostat Mode command
Action/Thermostat Mode	Thermostat mode, can be multiple
Info/Thermostat Exterior Temperature	Degrees Celsius
Info/Thermostat Room temperature	Degrees Celsius
Info/Thermostat Setpoint	Value between Min and Max of the Action/Thermostat Setpoint
Action/Thermostat Setpoint	Mandatory Min&Max
Info/Thermostat Lock	0 = Not Locked 1 = Locked
Action/Thermostat Lock	Lock the thermostat
Action/Thermostat Unlock	Unlock the thermostat

Gates or Garages

Generic type	Values / Action
Info/Portal opening status Info/Garage opening status (same treatment)	0 = Closed 252 = Closing in progress 253 = Stopped 254 = Opening in progress 255 = Open (Based on z-wave equipment, could also be binary or labeled ?)

with either :

Generic type	Values / Action
Action/Gate or garage toggle button	Switch opens if closed and closes if open Opening if blocked (for safety)

or either :

Generic type	Values / Action
Action/Gate or garage opening button	Ouverture
Action/Gate or garage close button	Fermeture

Electricité

Generic type	Unit
Info/Electric Power	Watts
Info/Electric Consumption	KWh

Divers

Generic type	Values / Unit
Info/Presence Occupancy	0 = Nobody 1 = Someone
Info/Air quality (AQI Index)	AQI index
Info/Air quality (Customizable Index)	ppb or µg/m3
Info/CO detector	0 = normal CO 1 = abnormal CO
Info/Brightness	0 → 100000 lux
Info/Humidity	%
Info/CO2 (ppm)	PPM or binary ?
Info/Temperature	-50 → 300°C
Info/Battery	%
Info/Battery charging	0 = no 1 = yes Not present = Not Rechargeable
Info/Low Battery	0 = no 1 = yes
Info/Smoke detection	0 = No smoke 1 = Smoke detected
Info/Flood Info/Water leak	0 = No leak detected 1 = Leak detected
Info/Sabotage	0 = No sabotage 1 = Sabotage
Info/Shock	0 = No shock 1 = Shock
Info/Pressure	bar
Info/Sound (dB)	dB

Equipment statuses

Generic type	Values / Action
Info/Active Status	0 = inactive 1 = active
Online Info/Connectivity	0 = offline 1 = online
Defective Info/Status	0 = no 1 = yes