Presentation
This plugin allows you to manage GCE Ecodevice cards.
Initially, this plugin was created to connect GCE Ecodevices.
Data visible on the Dashboard :
- ’'’Tele-information counters ‘’’
- ’'’pulse counters’’’
Refresh rate
The plugin updates this data in 2 ways :
Data is retrieved by the plugin every minute for everyone the counters. It is not possible to have a higher frequency.
For flow rates, instantaneous consumption and Apparent Power a collection is done by a daemon according to the configured frequency plugin level. Please note, a large decrease generates a large overloading your jeedom server.
Installation / Setup
We will now configure a device. To do so, click on ‘’ ‘Plugins / Home automation protocol / Eco-device’’’.
Then click on the button at the top left “’’ ‘Add a équipement’’’”.
Then enter the name of the equipment (ex. Ecodevice 1).
Then define :
-
’'’Parent object’’’
-
’'’Category ‘’ ‘(optional)
-
’'’Activate ‘’ ‘(check, otherwise the equipment will not be usable)
-
’'’Visible ‘’ ‘(optional if you don’t want to make it visible on the dashboard)
-
’'’IP adress’’’
-
’'’Port’’’
-
’'’Compte’’’
-
’'’Password’’’
You will find all the elements of the card in the menu at left by clicking on the icon.
Here is the counter configuration page. As long as the counter type is not defined, orders are not created.
Here is the configuration page for a tele-information input. As long as the contract type is not defined, orders are not created.
FAQ
In the left menu, click on the following icon to have
access : 
By default it is every minute. It is possible to configure manually push on the ecodevice. For debits, consumption instantaneous and apparent power can be collected more frequently depending on the demon.
Click on the icon to the left of the card name in the list of gauche.
To calculate the fuel flow in one hour of operation, know the marking of your fuel nozzle. For that, you find the information in the doc suivant.
The value given is in USgal / Hour with the correspondence in Kg / H.
For the density of the fuel, we can take 820Kg / m³ and a pressure of 7 bar.
So if you have a nozzle marked 0.65S : 2.67 kg / h (depending on Danfoss table). 2.67x0.82 = 2.1894 liters per hour. This gives a “approximate” indication of your consumption.
Yes, it was not written by me, but has the merit of existing. Thanks to the editor. http://blog.domadoo.fr/guides/jeedom-guide-dutilisation-plugin-ecodevice/
