IMPORTANT
If there is no information on the update, it means that it concerns only the update of documentation, translation or text.
Improvements
- Switch to version 9.20.0 by ZwaveJsUI
- Preparing to merge remote mode into next release
- Code cleaning
Configuration Additions
- Added config Neo Signal Repeater + (properties : Temperature, Humidity)
- Added config Fibaro FGR224 (properties : Switch, Power, Energy, Over-Current Notification, Over-Voltage Notification)
Configuration Changes
- Changing the configuration Fibaro Fgrgbwm442 to use the properties
- Changing the configuration Fibaro FGD212 Improved Properties Notification
Improvements
- Switch to version 9.12.0 by ZwaveJsUI
- Addition and management of the two new S2 Long Range security keys
Configuration Additions
- Added config Neo Signal Repeater (properties : Temperature, Humidity)
- Added config Shelly Qubino Wave 1 (properties : Switch, Hands Notification, Over-Current Notification, Heat-Sensor Notification)
- Added config Shelly Qubino Wave 1 PM (properties : Switch, Power, Energy, Mains Notification, Over-Current Notification, Heat-Sensor Notification)
- Added config Shelly Qubino Wave Pro 1 (properties : Switch, Hands Notification, Heat-Sensor Notification)
- Added config Shelly Qubino Wave Pro 1 PM (properties : Switch, Power, Energy, Mains Notification, Over-Current Notification, Over-Voltage Notification, Heat-Sensor Notification)
- Added config Shelly Qubino Wave 2 PM (properties : Switch, Power, Energy, Mains Notification, Over-Current Notification, Heat-Sensor Notification)
- Added config Shelly Qubino Wave Pro 2 (properties : Switch)
- Added config Shelly Qubino Wave Pro 2 PM (properties : Switch, Power, Energy, Over-Current Notification, Over-Voltage Notification)
- Added config Shelly Qubino Wave I4 (properties : Central Scene)
- Added config Shelly Qubino Wave Shutter (properties : Shutter, Power, Energy, Hands Notification, Over-Current Notification, Heat-Sensor Notification)
- Adding a subproperty overvoltage-notification for property Notification
Configuration Changes
- Changing the configuration Neo Plug to use the properties (be careful some models want to include themselves in S2 even though the manufacturer does not provide any DSK, include them by choosing non-secure instead of automatic mode)
Improvements
- Addition of an additionalDependancyCheck function for the core
Configuration Changes
- Changing the configuration MCOhome Mh7h to use the properties
Improvements
- Added an option to enable or disable the Soft Reset
- Switch to version 9.6.2 by ZwaveJsUI
Configuration Additions
- Added config HeatIt Z-TRM6 (properties : Temperature, ThermostatMode, ThermostatOperatingState, ThermostatModeAction, ThermostatSetpoint, Heat-Sensor Notification, Over-Load Notification)
- Added config Sunricher Remote Control 12 Button (properties : CentralScene x12, Battery)
Improvements
- Switch to version 9.5.1 of ZwaveJsUI (to be able to choose a port in path format necessary on certain VMs you must update the core)
Fixes
- Fix include bug S2 corrected on the ZwaveJS UI side following went up (in fact the callbacks were not done unless you had a window open on the ZwaveJS UI interface)
Configuration Additions
- Added config Shelly Qubino Wave 1PM (properties : Switch, Power, Energy, Mains Notification, Over-Current Notification, Heat-Sensor Notification)
- Added config Shelly Qubino Wave 1 (properties : Switch, Power, Energy, Mains Notification, Over-Current Notification, Heat-Sensor Notification)
- Added config Shelly Qubino Wave Shutter (properties : Shutter, Power, Energy, Hands Notification, Over-Current Notification, Heat-Sensor Notification)
- Added config Shelly Qubino Wave 2PM (properties : Switch, Power, Energy, Mains Notification, Over-Current Notification, Heat-Sensor Notification)
- Added config Shelly Qubino Wave 1 (properties : Switch, Hands Notification, Over-Current Notification, Heat-Sensor Notification) doubt whether to add Power and Energy (make a ticket if the device is supposed to report consumption but I don’t think so)
- Adding a property Windows Covering
Configuration Changes
- Changing the configuration Benext Keypad to use the properties (copy of Zipato but in benext version)
- Changing the configuration MCOhome Mh8FC to use the properties
- Changing the configuration MCOhome Mh8FC-4 to use the properties
- Changing the configuration Qubino ZMNKID - Flush OnOff Thermostat 2 to use the properties
- Changing the configuration Widom Meta Wired Motor to use the Windows Covering property
- Changing the configuration Wenzhou TZ78 use of endpoint 0 in place of endpoint 1 (in accordance with feedback from users)
- Editing the image MCOhome Mh8FC (clipping)
- Editing the image MCOhome Mh8FC-4 (clipping)
Configuration Additions
- Adding a subproperty notification-door for property Tilt
Configuration Changes
- Changing the configuration Aeotec Zwa012 to use the properties
- Modification of a subproperty simple-notification for property Opening
Improvements
- Switch to version 9.1.2 by ZwaveJsUI
Fixes
- Switch to version 8.26.0 from ZwaveJsUI temporarily
Fixes
- Correction avoiding certain messages in the log http.error in certain special cases
Improvements
- Switch to version 9.1.0 by ZwaveJsUI
- Added an option to manage notifications in the message center dead and alive nodes
- Added an option to manage notifications in the message center missed awakenings and return
Configuration Additions
- Added config Aeotec ZW187 Recessed Door (properties : Opening Simple, Battery, Notification Software, Notification Power-Status)
- Added config Thermofloor Heat It ZM Relay High Power (properties : Switch, Power, Energy, Heat Sensor Notification, Over Load Notification, Centra Scene)
- Adding a subproperty simple-notification for property Opening
Fixes
- Update fix OTA of a module firmware following a ZwaveJSUI change
Improvements
- Switch to version 8.25.1 by ZwaveJsUI.
- Added the possibility to make an update OTW a controller (if compatible)
- Added an option to manage notifications in the message center dead and alive nodes
- Added an option to manage notifications in the message center missed awakenings and return
Configuration Additions
- Added config Shelly Qubino Wave 1PM (properties : Switch, Power, Energy, Mains Notification, Over-Current Notification, Heat-Sensor Notification)
- Added config Shelly Qubino Wave 1 (properties : Switch, Power, Energy, Mains Notification, Over-Current Notification, Heat-Sensor Notification)
- Adding a subproperty binary-water for property Flood
- Adding a subproperty onlevel-barrier for property Multilevel
Configuration Changes
- Changing the configuration MCOhome Mh8FC to use the properties
- Changing the configuration NeoCoolCam WS02Z to use the properties
- Changing the configuration Kaipule IM20 to use the properties
- Changing the configuration HRT4_SRT321 to better use the properties
- Changing the configuration Benext Plug In Dimmer to better use the properties
- Changing the configuration Dome On Off Plug In Switch Plug In Dimmer to better use the properties
- Changing the configuration Domux Dx2skz to better use the properties
- Changing the configuration Swiid Plug to better use the properties
- Changing the configuration Everspring SM810 to better use the properties
- Changing the configuration Zipato PD01z to better use the properties
- Changing the configuration Vision Security ZS5101 to better use the properties
Improvements
- Switch to version 8.22.0 by ZwaveJsUI.
- Addition of all tty in the list of ports (this will be useless with the new core which will allow you to choose a port directly by the id)
- Added last route on a node’s stats page (depends on controller SDK)
- Added last speed-baud rate on a node’s stats page (depends on controller SDK)
- Added last speed-baud rate on global stats page (depends on controller SDK)
- Added last route on global stats page (depends on controller SDK)
- Added latest rssi on global stats page (depends on controller SDK)
- Added latest rssi on a node’s stats page (depends on controller SDK)
- Addition of a graph Network route representing last routes taken (will scale and may not handle all cases depends on controller SDK)
- Addition of a message in the message center when a node goes Dead (in addition to the equipment status command)
- Addition of a message in the message center when a node goes Alive after being Dead (in addition to the equipment status command)
- Addition of a message in the message center when a node has not woken up after 4 times its wakeup interval
Configuration Additions
- Adding a property ThermostatFanState
- Adding a sub-command Label State to the Barrier Operator property (to have a label command with text in addition to the numeric command)
- Added config MCOhome Mh8FC (properties : ThermostatMode, ThermostatModeAction, ThermostatSetpoint, ThermostatFanMode, ThermostatFanModeAction, ThermostatOperatingState, ThermostatFanState, Temperature)
- Added config Heltun HE-FT01 (properties : ThermostatMode, ThermostatModeAction, ThermostatSetpoint, ThermostatFanMode, ThermostatFanModeAction, ThermostatOperatingState, ThermostatFanState, Temperature, Illuminance, Humidity, Power, Energy)
- Added config MCOhome MH3901 (properties : ThermostatMode, ThermostatModeAction, ThermostatSetpoint, ThermostatOperatingState, Temperature)
- Adding a sub-command Label State to the Thermostat Operating State property (to have a label command with text in addition to the numeric command)
Configuration Changes
- Changing the configuration HRT4_SRT321 to use the properties
- Changing the configuration SRT323 to use the properties
- Editing the image HRT4_SRT321 (clipping)
- Editing the image SRT323 (clipping)
- Editing the image SSR303 (clipping)
- Editing the image SIR321 (clipping)
- Editing the image SES303 (clipping)
- Editing the image SES302 (clipping)
- Editing the image SCSC17 (clipping)
Improvements
- Switch to version 8.19.0 by ZwaveJsUI.
- Modules FLIRS are no longer considered active at the mesh on the network graph
Configuration Changes
- Changing the configuration Aeotec DSB04100 door window sensor to use the properties
- Changing the configuration Aeotec DSC10 Heavy Duty Switch to use the properties
- Changing the configuration Aeotec DSC06106 Smart Energy Switch to use the properties
- Changing the configuration Aeotec DSC11 Smart Strip to use the properties
- Changing the configuration Aeotec DSC08101 Smart Energy Illuminator to use the properties
- Changing the configuration Aeotec DSC014104 Blind Control to use the properties
- Changing the configuration Aeotec DSC17103 Micro Double Switch to use the properties
- Changing the configuration Aeotec DSC18103 Micro Switch 2nd to use the properties
- Changing the configuration Aeotec DSC26103 Micro Switch 2nd to use the properties
- Changing the configuration Aeotec DSC27103 Micro Dimmer 2nd to use the properties
- Changing the configuration Benext Panic Watch to use the properties
- Changing the configuration Benext Panic Button to use the properties
- Changing the configuration Benext Plug In Dimmer to use the properties
- Changing the configuration Dome On Off Plug In Switch Plug In Dimmer to use the properties
- Changing the configuration Domux Dx2skz to use the properties
- Changing the configuration Everspring AD142 to use the properties
- Changing the configuration Everspring AN145 to use the properties
- Changing the configuration Everspring EH403 Led FloodLight to use the properties
- Changing the configuration Heiman Dx2skz to use the properties
- Changing the configuration Philio Smart Dimmer E27 to use the properties
- Changing the configuration Philio Pan03 to use the properties
- Changing the configuration Popp Smart Plug to use the properties
- Changing the configuration Popp 009105 to use the properties
- Changing the configuration Schlage On Wall to use the properties
- Changing the configuration Sigma Power Plug to use the properties
- Changing the configuration Swiid Plug to use the properties
Configuration Additions
- Added config Heat It ZM Dimmer (properties : Multilevel, Power, Energy, CentralScene, Notification)
- Added config Sigma PZ701U (properties : Switch)
- Added config Neo RC03Z (properties : Central Scene, Battery)
- Adding a sub-property Heat sensor in the property Notification
- Added config U-Fairy GR-201N (properties : Switch)
Improvements
- THE refresh can now go up to 100 seconds instead of 60
- Switch to version 8.13.1 by ZwaveJsUI.
- Changing the function pollValue for properties at value (thank you @superbricolo)
Configuration Changes
- Changing the configuration Aeotec ZWA19 Water Sensor to use the properties
- Changing the configuration Aeotec ZWA24 7in1 to use the properties
- Changing the configuration Everspring SM810 to use the properties
- Editing a property Velocity
- Editing the image Dlink 510 (clipping)
- Editing the image Fibaro Fgs-213 (clipping)
Configuration Additions
- Added config Sigma PZ701U (properties : Switch)
- Added config Neo RC03Z (properties : Central Scene, Battery)
- Adding a sub-property Heat sensor in the property Notification
- Added config U-Fairy GR-201N (properties : Switch)
Configuration Changes
- Changing the configuration Aeotec ZWA24 7in1 to use the properties
- Changing the configuration Everspring SM810 to use the properties
- Changing the configuration Aeotec ZW122 to use the properties
- Grouping of configurations Danfoss Living Connect
- Changing the configuration Fibaro FGR-223 change of power and energy endpoints
- Changing the configuration Fibaro FGR-223 addition of hardware and over-current notification
- Changing the configuration Fibaro FGS213 switch to endpoint 1 (firmware >=3.3) and added heat sensor and over-current notification
- Editing the image Aeotec ZWA24 7in1 (clipping)
- Editing a property Velocity
- Editing the image Dlink 510 (clipping)
- Editing the image Fibaro Fgs-213 (clipping)
- Editing the image Fibaro Fgs-221 (clipping)
- Editing the image Fibaro Fgs-223 (clipping)
- Editing the image Fibaro Wall Plug (clipping)
- Editing the image Fibaro Wall Plug GEN5 (clipping)
Configuration Additions
- Adding a sub-property Heat sensor in the property Notification
- Added config U-Fairy GR-201N (properties : Switch)
- Added config Danfoss Boiler Relay (properties : Switch)
- Added config Benext Alarm Sound (properties : Switch)
Configuration Changes
- Changing the configuration Aeotec ZWA008 Door Sensor to use the properties
- Changing the configuration Qubino ZMNHLAX PWM Thermostat to use the properties
- Changing the configuration Qubino ZMNHDA2 Dimmer to use the properties
- Changing the configuration Fibaro FGR-223 modification of the endpoints of refresh
- Changing the configuration Fibaro Fgrgbwm442 to use the properties
- Changing the configuration Fibaro FGD212 added Notification properties
- Changing the configuration Qubino ZMNHBA2 Flush 2 Relays to use the properties
- Changing the configuration Fibaro Walli Switch added Notification properties
- Changing the configuration Dlink Dchz110 to use the properties
- Changing the configuration Domitech Smart Led Light to use the properties
- Changing the configuration Duwii Switch to use the properties
- Changing the configuration Everspring AN157 to use the properties
- Changing the configuration Popp Smoke Sensor to use the properties
- Changing the configuration Duwii Edan 300 to use the properties
- Editing the image Duwii Dimmer (clipping)
- Editing the image Aeotec ZWA008 Door Sensor (clipping)
- Editing the image Duwii Switch (clipping)
- Editing the image Duwii Edan 300 (clipping)
- Editing the image Duwii Blind Control (clipping)
- Editing the image Duwii Remote (clipping)
- Editing the image Duwii Zs3500 (clipping)
- Editing the image MCO Zipato p210 dimmer (clipping)
Configuration Additions
- Adding a sub-property Load error in the property Notification
- Adding a sub-property Fibaro-effects2 in the property Color
If you are affected by a modification or addition of configuration, make a synchronization then reload the commands of the equipment by “recreating all the commands” after the update.
Improvements
- Addition of a complete engine Refresh management, useful for some modules that do not correctly report some changes after action. Not to be used without a valid reason. The configuration files will carry the elements if necessary
- Adding a tab Options on the equipment page. To view and configure Refreshes and possible future options
- Addition of the number of Refresh on the page Health
Configuration Changes
- Changing the configuration Qubino Luxy Smart Light to use the properties
- Changing the configuration Popp Rain Meter to use the properties
- Changing the configuration Fibaro FGR-223 first configuration to use the refresh engine (indeed this module has a known bug, it does not go up the positions or in erroneous ways when a movement is initiated by the Z-Wave) to recover the refresh (go to reload command by choosing “without recreating orders”) you should see the “refresh” in the options tab.
- Changing the configuration Fibaro FGR-223 change of power and energy endpoints
- Changing the configuration Fibaro FGR-223 addition of hardware and over-current notification
- Changing the configuration Fibaro FGR-223 replace scene property with centralscene
Configuration Additions
- Added config Qubino Luxy Smart Switch (properties : Switch, Multilevel, Power, Energy, Color, Notification, NotificationEvent)
- Adding the picture Qubino Luxy Smart Switch
- Added config Abus Security Center SHSG10000 (properties : Switch, Battery)
- Adding the picture Abus Security Center SHSG10000
- Adding a sub-property Overall in the property Rain
- Adding a sub-property Basic in the property Rain
- Adding a sub-property Overload in the property Notification
- Adding a property Water consumption
- Adding a property Notificationevent
If you are affected by a modification or addition of configuration, make a synchronization then reload the commands of the equipment by “recreating all the commands” after the update.
Improvements
- Addition of the management of Nodes Notifications
Configuration Changes
- Changing the configuration Aeotec Range Extender 6 to use the properties
- Changing the configuration Zipato PD01z to use the properties
- Changing the configuration NeoCoolCam PD01zt to use the properties
- Changing the configuration NeoCoolCam PD01z to use the properties
- Changing the configuration Philio/Zipato Micromodule Energy Meter to use the properties
- Changing the configuration Fibaro FGS214 to use the properties
- Changing the configuration Fibaro FGS213 switch to endpoint 0 (to be confirmed)
- Configuration rollback Fibaro FGD212 firmware 3.5
- Changing the configuration Zipato Keypad addition of property NodeNotification
- Changing the configuration Schlage Keypad addition of property NodeNotification
- Changing the configuration Eurotronic Valve Spirit to use the properties
- Grouping of configurations Danfoss Living Connect
- Changing the configuration Danfoss Devolo Living Connect to use the properties
- Changing the configuration Danfoss Living Connect to use the properties
- Changing the configuration Danfoss Pop Radiator Thermostat to use the properties
- Changing the configuration Philio PSP05 to use the properties
- Changing the configuration Zipato ZP3102 to use the properties
- Changing the configuration Vision ZP3102 to use the properties
- Changing the configuration Remotec ZXT-120 to use the properties
- Changing the configuration Everspring Ad147 to use the properties
- Changing the configuration Heatit ThermoFloor Ztemp2 to use the properties
- Editing the image Horstmann Secure SRT321 (clipping)
- Editing the image Remotec ZXT-120 (clipping)
- Editing the image Fibaro FGS 224 (clipping)
- Editing the image Fibaro FGS 213 (clipping)
- Editing the image Fibaro Button (clipping)
Configuration Additions
- Added config Cherubini ORA ZRX (properties : Shutter, Notification)
- Adding the picture Cherubini ORA ZRX
- Added config Heiman HS2WD Siren (properties : Switch, Battery)
- Adding the picture Heiman HS2WD Siren
- Adding a sub-property Power status in the property Notification
- Adding a property NodeNotification
If you are affected by a modification or addition of configuration, make a synchronization then reload the commands of the equipment by “recreating all the commands” after the update.
Fixes
- Fix on some missing attributes on the health page on some nodes to avoid errors (without consequences) in the http.error
Improvements
- Passage of ZwaveJS UI to version 8.6.1
- Addition of the S2 management (ZwaveJS UI having made the expected changes)
- Addition of kind of security on the page node information
Configuration Changes
- Changing the configuration Heiman CO sensor to use the properties
- Changing the configuration Heiman Smoke detector to use the properties
- Changing the configuration Domux CO sensor to use the properties
- Changing the configuration Vision Security ZS5101 to use the properties
- Changing the configuration HomeSeer Ez Motion to use the properties
- Changing the configuration Shenzhen Smoke Detector to use the properties
- Changing the configuration Vision Security ZD2102 to use the properties
- Editing the image Vision Security ZD2102 (clipping)
- Changing the configuration Aeotec Range Extender 7 to use the properties
- Changing the configuration Zipato ZD2102 to use the properties
- Changing the configuration Qubino Weather Station to use the properties
- Changing the configuration Everspring ST814 to use the properties
- Changing the configuration Hank HKZW-SO08 to use the properties
- Changing the configuration Hank HKZW-SO01 to use the properties
- Changing the configuration Hank HKZW-SCN01 to use the properties
- Changing the configuration Philio PAT02-B to use the properties
- Editing the image Philio PAT02-B (clipping)
- Editing the image Abuse SHWM1000
Configuration Additions
- Added config Zipato Energy Meter (properties : Power, Energy, Voltage, Current)
- Added image for Zipato Energy Meter
- Added config Airzone Aidoo Zwave (properties : Temperature, Thermostatmode, Thermostatmodeaction, Thermostatfanmode, Thermostatfanmodeaction, Thermostatsetpoint, Notification)
- Added image for Airzone Aidoo Zwave
- Adding a property Thermostatfanmode
- Adding a property Thermostatfanmodeaction
- Adding a property Direction
- Adding a property Velocity
- Adding a property Rain
- Adding a property Co
- Adding a sub-property Basic motion in the property Motion
- Adding a sub-property Dust-in-device in the property Notification
If you are affected by a modification or addition of configuration, make a synchronization then reload the commands of the equipment by “recreating all the commands” after the update.
Improvements
- Added the ability to display explanatory assistants on the page of certain equipment (Keypad Zipato for example to explain the operation of the codes)
Configuration Changes
- Changing the configuration Aetoec Nanomote Quad to use the properties
- Changing the configuration Fibaro Fgs211 to use the properties
- Changing the configuration Fibaro fgwreu111 Walli Shutter passing a Shutter/level property and passing power and energy on endpoint 1
- Changing the configuration Zipato Keypad to use the properties
- Changing the configuration Schlage Keypad to use the properties
Configuration Additions
- Added config Zooz ZEN17 (properties : Switch)
- Added image for Zooz ZEN17
- Added config Abus Flood Sensor (properties : Flood, Tamper, Battery)
- Added image for Abus Flood Sensor
- Adding a property User Code
If you are affected by a modification or addition of configuration, make a synchronization then reload the commands of the equipment by “recreating all the commands” after the update.
Improvements
- Adding a tab NVM management on the network page. Backup, Download, Send and Restore
- Adding a tab Update on a node page.
- Addition of the version of SDKs on the information page of a controller or the modules raising it
Configuration Changes
- Changing the configuration Cherubini Widom Smart Plug to use the properties
- Changing the configuration Qubino 3 Phase Meter to use the properties
- Change of ownership Power Factor for option production
Configuration Additions
- Added config Cherubini Widom Meta double switch (properties : Switch, Central Scene)
- Added image for Cherubini Widom Meta double switch
- Added config Cherubini Widom Meta wired motor CONTR.7 (properties : Shutter)
- Added image for Cherubini Widom Meta wired motor CONTR.7
If you are affected by a modification or addition of configuration, make a synchronization then reload the commands of the equipment by “recreating all the commands” after the update.
Improvements
- Management commands without units while it should (in the zwaveJS return) so as not to pollute the log
Configuration Changes
- Changing the configuration Qubino ZMNHNDX Flush 1D to use the properties
- Changing the configuration Fibaro FGSS101 Smoke to use the properties
- Changing the configuration Smarthome Everspring AN-179 to use the properties
- Changing the configuration Aeotec ZWA009 AERQ to use the properties
- Changing the configuration Popp Outdoor Siren to use the properties (partly)
- Changing the configuration Aetoec ZWA080 to use the properties (in part) and add sound controls (volume and sound)
- Change of ownership Heat with class case management ALARM SENSOR
- Change of ownership Smoke with class case management ALARM SENSOR
- Change of ownership Set point thermostat to have the instructions with the widget button by default
- Editing the image Popp Outdoor Siren clipping
Configuration Additions
- Added config Secure Hortsmann SRT321 (properties : ThermostatMode, ThermostatOperatingState, ThermostatModeAction, ThermostatSetpoint, Temperature, Battery)
- Added image for Secure Hortsmann SRT321
- Added config Hoppe ConnectSense lock (properties : Opening, Notification Sensor, Tilt, Battery)
- Added image for Hoppe ConnectSense lock
- Added parameters for Hoppe ConnectSense lock
If you are affected by a modification or addition of configuration, make a synchronization then reload the commands of the equipment by “recreating all the commands” after the update.
Fixes
- Correction on configuration parameters in order to to avoid sending 0 in the first place during a list-type choice (on a parameter proposing it)
Improvements
- Addition of a RELAUNCH necessary of the engine in case of failed exclusion
- Display of the message concerning the 0 order that in the case of a initiated node
Configuration Changes
- Changing the configuration Aeotec TriSensor to use the properties
- Changing the configuration Hank HKZW-MS02 to use the properties
- Changing the configuration Philio PSM02 to use the properties
- Changing the configuration Everspring AN158 to use the properties
- Changing the configuration Danfoss Room Sensor to use the properties
- Changing the configuration Vision ZS Shock and Vibration to use the properties
- Changing the configuration Fibaro Walli Controller to use the properties
- Changing the configuration Fibaro FGD211 to use the properties
- Changing the configuration Fibaro Wall Plug UK to use the properties
- Changing the configuration Fibaro Walli Outlet F to use the properties
- Changing the configuration Fibaro Walli Dimmer to use the properties
- Changing the configuration Fibaro RGBW441 to use the property fibaro effects
- Change of ownership Luminance with addition of a mode in %
- Change of ownership Set point thermostat to have the instructions with the widget button by default
- Change of ownership Color with addition of a type fibaro effects (to stop describing the commands)
- Addition of a recommended setting for the Philio PST02
If you are affected by a modification or addition of configuration, make a synchronization then reload the commands of the equipment by “recreating all the commands” after the update.
Improvements
- Addition of a ZwaveJS UI version management
- Addition of a message in the message center and on the plugin page when ZwaveJS UI needs to be updated
- Passage of the ZwaveJS UI version to version 8.5.1
Configuration Changes
- Change settings for Hank Smart Plug (HKZW-SO08) (display issue)
If you are affected by a modification or addition of configuration, make a synchronization then reload the commands of the equipment by “recreating all the commands” after the update.
Improvements
- Addition of a visual for a parameter or wakeup pending
- Addition of a page allowing to see all the settings pending
- Addition of a webapp page allowing to see all the settings pending
- Addition of a delete button on the page Pending. Allows you to delete a line on hold. This does not delete the order that has been sent to the controller but only the information pending in Jeedom (useful for calibration parameters for example which never take the value sent or any other parameter where it would be useless)
Configuration Changes
- Changing the configuration Popp Strike Lock to use the opening property (for the contact)
- Changing the configuration Fibaro FGD212 to add difference management from firmware 3.5 (endpoint 1 on firmware <= 3.4 endpoint 0 on target only otherwise)
- Change of ownership Door Lock to add Unlock (with timeout) on all devices using this property
Configuration Additions
- Added config Hank Smart Plug (HKZW-SO08) (properties : Switch, Power, Energy, Voltage, Current, Scene)
- Added config Idinio foot dimmer (properties : Multilevel, Power, Energy)
- Added parameters for Hank Smart Plug (HKZW-SO08)
If you are affected by a modification or addition of configuration, make a synchronization then reload the commands of the equipment by “recreating all the commands” after the update.
Fixes
- Change on the graphic networks : only the first direct routes will turn red when hovering over a node to avoid the error on certain installations and certain browsers Max Stack Size Exceeded related to recursions
Improvements
- To take in consideration refreshNodeCC as a property of a manually created command to refresh a CC
- Addition of a horizontal scroll on the network modal/tab routing table (thx @Salvialf)
- Displacement of order counter on the right side of the equipment page
Configuration Changes
- Changing the configuration Fibaro FGR223 to use the power of the multilevel class
- Changing the configuration Fibaro FGR222 to use the power of the multilevel class
- Changing the configuration Fibaro FGRM222 to use the power of the multilevel class
- Changing the configuration Devolo Mt02648 to use properties and add recommended settings
- Changing the configuration Devolo Mt02647 to use properties and add recommended settings
- Changing the configuration Popp Strike Lock to use the properties
- Changing the configuration Aeotec ZWA011 to use the properties and add its image
If you are affected by a modification or addition of configuration, make a synchronization then reload the commands of the equipment by “recreating all the commands” after the update.
Improvements
- Added access to the ZwaveJS UI interface (in the Z-Wave Network menu, Actions tab). Do not use it to change settings!
- Addition of a port for the particular case of some Raspberry Pi (more will be added as needed)
- Added a command counter for each equipment (ignoring the 4 technical commands)
- Added dynamic help in the case of zero commands.