Luna-plugin

since 03/27/2023 new image Jeedom Luna (known as V2)

You can make an update without loss of backup etc by clicking on “Update Recovery module”. this will restart your Jeedom Luna but you will not lose your configurations. This will make changes to the recovery and boot module of the box which will allow better stability of the box.

Attention concern of Luna flashing

We received feedback on an error in flashing certain Jeedom Luna boxes. (only those shipped before 2023) We are sorry for this and have informed our Domadoo reseller.

If you manage to connect to your Jeedom, please launch the Luna plugin (Plugins/Home automation gateway/luna) and go to :

• Recovery module update Then do the recovery in :
• Recovery (Reset Factory) This will update your Box completely.

If you do not have access to your box, please keep the reset button on the box pressed for more than 10 seconds; when the latter is released, the box should flash. Let her finish the process. Jeedom should become operational again. You can do the above procedure for a complete update.

If it doesn’t blink :

• Please contact Domadoo via the following link; the Domadoo team will provide you with a return label and send you a correctly flashed Luna :

https://www.domadoo.fr/rma

The features of the Luna plugin

USB Fix

In the Luna plugin version of 02/05/2023, the Zigbee port has been fixed, you must use the ttyUSBLUNA-Zigbee port. For external USBs, this is also fixed automatically with the name and or serial number.

Recovery module update

The update brings the latest image into place on the Luna; it will use this image during a recovery (reset button on the box or recovery button on the plugin). Click on the recovery button; the Luna will download the latest version of its image and reboot, the green LEDs on the Luna case will flash. Une fois ces dernières fixes, vous pourrez y accéder de nouveau via son adresse IP ou via http://jeedomluna.local; the recovery software will be up to date.

Recovery (Reset Factory)

During a factory reset the box is restored to factory configuration according to the updated image via the button given above. WARNING : You must make a backup of your box before this operation because you will lose the data from your box (except the backup on the SD card).

LED

You can via the select type command change the color and animation of the led (can be turned off).

Batterie

The battery is activated when installing/updating the plugin: If you wish, you can deactivate it by clicking on the Turn off battery command You can, via two pieces of feedback, have the battery percentage as well as the type of power supply of your box. (Charging, Discharging, Full etc).

SD

Allows the management (formatting) of the micro-SD card that you can add to the box, as well as the transfer to this SD card of Jeedom backups.

Power and Reset buttons (v1) Luna plugin not up to date

• Reset : less than 1 second for a forced reboot of the box.
• Reset : more than 10 seconds for a Factory Reset of the box.
• Food : more than 10 seconds for a forced shutdown of the Fox with battery shutdown (you must first remove the power supply to do this).

Power and Reset buttons (v2 new image)

• Reset button : less than 1 second for a hardware restart of the Luna box.

• Power Button : between 1 and 4 seconds for the battery to turn off or on (Orange = off, Green = On).
• Power Button : between 5 and 9 seconds restart of the box (blue flashing when released).
• Power Button : between 10 and 20 seconds for the box to stop (orange flashing when released).
• Power Button : more than 30 seconds to Reset Factory of the box (red flashing when released).

Lora (only for Jeedom Luna boxes sold with the Jeedom Lora module)

• Automatic detection of the module and launch of the packet forwarder, on the localhost of the jeedom. Use the LNS plugin to install the application; nothing needs to be done from the Luna plugin, everything is automatic.
• possibility of deactivating it in the LTE part

Hotspot

In the WiFi part of the plugin, you can check the “Hotspot” box, which will allow you to create a WiFi access point on your Luna Box. You can activate DHCP mode, which will automatically assign an IP address to clients who connect to your Box via the access point. For the IP address part of DHCP, here is an example : if you choose 192.168.4.1, the IP addresses of your DHCP server will be, according to the subnet mask (255.255.255.0), in the range 192.168.4.2 to 192.168.4.254.

Set an IP

• you can in the ethernet or wifi page of the luna plugin set the ip addresses of it, to set the ethernet you must first have an activated wifi connection.

Prioritize connections

In the home page of the plugin you can prioritize the connections so that the box switches from Ethernet to wifi if there is no connection or vice versa.

The luna plugin allows you to connect from your luna to a Wifi network (with or without a password).

To do this, go to the luna plugin, then select the Luna equipment. Here you can activate and then select the wifi you want (2.4Ghz and 5Ghz), then type the password and save.

4G (only compatible with Jeedom Luna 4G boxes)

Automatic detection of 4G internal to the box. Please go through the Luna plugin and click on ‘Detect LTE module’ Request pin code and APN in the LTE page of the Luna plugin. if 4G detected, launch of a connection module in the background which automatically switches from Ethernet or wifi to 4G if necessary. The SMS plugin works at the same time as 4G on the Luna 4G. The settings are made in the LTE page of the plugin.

/!\ Be careful, you need IPv4 type APNs (bouygue : ebouygtel.com, Orange : orange, free : free). /!\

FAQ

I have a Luna 4G, but the LTE tab is not displayed

In the General tab, there are Administrative Options. Click on Restart Plugin Configuration