Monitoring plugin
Plugin allows to monitor systems, it has several CLI engine (bash), SNMP, ping and URL
Important
This plugin is quite complex and therefore needs to read the documentation and some knowledge. IT IS NOT PLUG AND PLAY
Configuration
After downloading the plugin, you will simply need to activate the plugin
Equipements
The configuration of the Monitoring equipment is accessible from the Plugins menu then Monitoring
- Name of equipment
- Parent object
- Category
- Activer
- Visible
- Update frequency : in cron format (ex */ 15 * * * *)
- Engine : motor to activate for the equipment in question.
- Bash / Shell settings
- Fashion : local or remote (if local there is nothing else to fill)
- IP
- Username
- Password
- SNMP settings
- IP
- Protocole
- Username
- Password
- Fashion authentication
- Security
- Private protocol
- Priv passphrase
- Ping settings
- IP
Moteur
SNMP
The SNMP engine allows you to connect to machines in SNMP and retrieve values. Below the example of SNMP OID
General OIDs
Load
| OID |
Data |
| .1.3.6.1.4.1.2021.10.1.3.1 |
1 minute Load |
| .1.3.6.1.4.1.2021.10.1.3.2 |
5 minute Load |
| .1.3.6.1.4.1.2021.10.1.3.3 |
15 minute Load |
CPU
| OID |
Data |
| .1.3.6.1.4.1.2021.11.9.0 |
Percentage of user CPU time |
| .1.3.6.1.4.1.2021.11.50.0 |
Raw user cpu time |
| .1.3.6.1.4.1.2021.11.10.0 |
Percentages of system CPU time |
| .1.3.6.1.4.1.2021.11.52.0 |
Raw system cpu time |
| .1.3.6.1.4.1.2021.11.11.0 |
Percentages of idle CPU time |
| .1.3.6.1.4.1.2021.11.53.0 |
Raw idle cpu time |
| .1.3.6.1.4.1.2021.11.51.0 |
Raw nice cpu time |
Memory Statistics
| OID |
Data |
| .1.3.6.1.4.1.2021.4.3.0 |
Total Swap Size |
| .1.3.6.1.4.1.2021.4.4.0 |
Available Swap Space |
| .1.3.6.1.4.1.2021.4.5.0 |
Total RAM in machine |
| .1.3.6.1.4.1.2021.4.6.0 |
Total RAM free |
| .1.3.6.1.4.1.2021.4.11.0 |
Total RAM used |
| .1.3.6.1.4.1.2021.4.13.0 |
Total RAM Shared |
| .1.3.6.1.4.1.2021.4.14.0 |
Total RAM Buffered |
| .1.3.6.1.4.1.2021.4.15.0 |
Total Cached Memory |
Disk
| OID |
Data |
| .1.3.6.1.4.1.2021.9.1.2.X |
Path where the disk is mounted |
| .1.3.6.1.4.1.2021.9.1.3.X |
Path of the device for the partition |
| .1.3.6.1.4.1.2021.9.1.6.X |
Total size of the disk / partion (kBytes) |
| .1.3.6.1.4.1.2021.9.1.7.X |
Available space on the disk |
| .1.3.6.1.4.1.2021.9.1.8.X |
Used space on the disk |
| .1.3.6.1.4.1.2021.9.1.9.X |
Percentage of space used on disk |
| .1.3.6.1.4.1.2021.9.1.10.X |
Percentage of inodes used on disk |
System
| OID |
Data |
| .1.3.6.1.2.1.1.3.0 |
System Uptime |
VMware OIDs
| OID |
Data |
| .1.3.6.1.2.1.25.2.3.1.6.6 |
Memory usage |
| .1.3.6.1.4.1.6876.1.2.0 |
VMware version |
OIDs Synology
| OID |
Data |
| .1.3.6.1.4.1.6574.1.5.1.0 |
Model |
| .1.3.6.1.4.1.6574.1.5.3.0 |
DSM version |
| .1.3.6.1.4.1.6574.1.1.0 |
System Status |
| .1.3.6.1.4.1.6574.3.1.1.2.0 |
Displays RAID status |
| .1.3.6.1.4.1.6574.1.4.2.0 |
CPU fan |
| .1.3.6.1.4.1.6574.1.4.1.0 |
Fan System |
| .1.3.6.1.4.1.2021.11.9.0 |
CPU load |
| .1.3.6.1.4.1.6574.1.2.0 |
System Temp |
| .1.3.6.1.4.1.6574.2.1.1.5.X |
Status of disk X (starts at 0) |
| .1.3.6.1.4.1.6574.2.1.1.6.X |
Disk temperature X (starts at 0) |
| .1.3.6.1.4.1.6574.3.1.1.2.X |
Status of raid X (starts at 0) |
| .1.3.6.1.4.1.6574.6.1.1.3.1 |
Number of users connected in CIFS |
| .1.3.6.1.4.1.6574.6.1.1.3.2 |
Number of users logged in AFP |
| .1.3.6.1.4.1.6574.6.1.1.3.3 |
Number of users logged in NFS |
| .1.3.6.1.4.1.6574.6.1.1.3.4 |
Number of users logged in via FTP |
| .1.3.6.1.4.1.6574.6.1.1.3.5 |
Number of users connected in SFTP |
| .1.3.6.1.4.1.6574.6.1.1.3.6 |
Number of users logged in HTTP / HTTPS |
| .1.3.6.1.4.1.6574.6.1.1.3.7 |
Number of users connected in TELNET |
| .1.3.6.1.4.1.6574.6.1.1.3.8 |
Number of users logged in SSH |
| .1.3.6.1.4.1.6574.6.1.1.3.9 |
Number of users logged in OTHER |
OIDs Synology UPS
| OID |
Data |
| .1.3.6.1.4.1.6574.4.1.1.0 |
Model |
| .1.3.6.1.4.1.6574.4.2.1.0 |
Status |
| .1.3.6.1.4.1.6574.4.2.12.1.0 |
Charge |
| .1.3.6.1.4.1.6574.4.3.1.1.0 |
Battery status |
| .1.3.6.1.4.1.6574.4.3.6.1.0 |
Autonomy |
OIDs calculated by the plugin
| OID |
Data |
| sysuptime |
Formatted system uptime |
| memoryused |
Actual memory usage |
| cpuused |
Average CPU usage under VMware |
| vmwarerunvm |
Number of VMs started on vmware |
| diskused::X |
Disc fill rate X |
| networkin::X |
Average output interface X throughput |
| networkout::X |
Average flow of the input X interface |
| runprocess::X |
Gives the number of X processes that are running |
Ping
For ping there are 2 commands possible :
| Command |
Data |
| ping |
Ping result |
| latency |
latency test |
CLI
Here you can use all bash commands or commands pre-made by the plugin :
| Command |
Data |
| cpufreq |
CPU frequency |
| cputemp |
CPU temperature |
| cpuusage |
CPU usage in% |
| memuse |
% of memory used |
| swap |
% of swap used |
| loadavg15 |
Charge over 15min |
| uptime |
Uptime of the machine |
| hdduse::#mount# |
% of use of the mounting point mount |
URL
| Command |
Data |
| access::#url#::#username#::#password# |
Test access to a URL with URL : URL à tester (ex http://www.google.fr), Username: username (if necessary),Password : user password (can be empty) |