This page allows you to configure the display of all your home automation very fine way. It takes time but its only limit is your imagination.

It is accessible by Home → Design

Tip

It is possible to go directly to a design thanks to the submenu.

IMPORTANT

All actions are done by right click on this page, attention to do it well in design. During creation, it is therefore necessary to do in the middle of the page (to be sure to be on the design).

In the menu (right click therefore), we find the following actions :

IMPORTANT

The configuration of the design elements is done by clicking on these.

Design configuration

Found here :

General configuration of elements

NOTE

Depending on the type of item, options may change.

NOTE

The selected item is highlighted in red (instead of green for all the others).

Display setting

Remove

Remove item

Duplicate

Allows you to duplicate the element

Lock

Locks the element so that it is no longer movable or redimensionnable.

Graphic

Display settings

Advanced configuration

Allows you to choose the commands to grapher

Text / html

IMPORTANT

If you put HTML code (especially Javascript), be careful to check it before because you can if there is an error in it or if it overwrites a Jeedom component completely crashing the design and all you have to do is delete it directly from the database

Scenario

Display settings

No specific display settings

Link

Display settings

Equipment

Display settings

No specific display settings

Advanced configuration

Displays the advanced equipment configuration window (see home automation summary documentation (“display”))

Ordered

Display settings

No specific display settings

Advanced configuration

Displays the advanced configuration window of the command (see home automation summary documentation (“display”))

Picture / Camera

Display settings

Zoned

Display settings

Single macro

In this mode, a click on the zone performs one or more actions.

Here you just need to indicate the list of actions to do when clicking on the area

Binary macro

In this mode, Jeedom will execute the On or Off action (s) in depending on the status of the order you give. Ex : if the order is worth 0 then Jeedom will execute the action (s) On otherwise it will execute the action (s) Off

You just have to put the actions to do for the On and for the Off

Hover widget

In this mode, when hovering or clicking in the Jeedom area, you display the widget in question

Summary

Faq

I can no longer edit my design

If you have put a widget or an image that takes almost the entire design, you must click outside the widget or image to access the menu by right-clicking.

Delete a design that no longer works

In the administration part then OS / DB, make “select * from planHeader”, recover the id of the design in question and make a “delete from planHeader where id=#TODO#” and “delete from plan where planHeader_id=#todo#” replacing well #TODO# by the design id previously found.

Nous utilisons des cookies pour vous garantir la meilleure expérience sur notre site web. Si vous continuez à utiliser ce site, nous supposerons que vous en êtes satisfait.